EVA-FOAM is an alternative to the traditional carpet or wooden/synthetic floor. It is made of closed-cell RE/EVA that does not absorb water, provides excellent adhesion both when dry as well as when wet, does not heat up during the day and is resistant to sunlight. Due to its excellent shock-absorbing abilities, it ensures maximum comfort of passengers on board.

EVA-FOAM has its own adhesive that is specially designed for marine use and does not damage the boat’s gel coat when the floor is detached. No additional glue is required.

EVA-FOAM is easy to clean with liquid soap, hot water and a soft brush. Do not use acid-based cleaners.

The material is available in 120 x 220cm sheets, with a specific direction of the pile along its length.

There is a cost per square metre, according to the dimension of the sheets which determines the final area in m2. The final price depends on the area covered and the design. For more information, please call us at 210 2851225 or send us an e-mail at info@boatwrapping.gr .

The manufacturer lists a lifetime of 36 months, which may be higher or lower depending on the usage, weather conditions, maintenance etc. EVA-FOAM is a “value for money” material which, however, does not remain unchanged over time. The boat must be protected from the weather and any water must be thoroughly drained. No type of adhesive can last long when it is permanently in water and dust.

It is very easy to apply, as long as you follow our instructions closely and carefully.

There are plenty of designs that we can support on the material. For engraving, we use a state-of-the-art CNC machine or Laser to produce a Logo, providing our clients with great design options and capabilities in cooperation with our in-house designer.

EVA-FOAM is generally hydrophobic and easy to clean. Stubborn dirt, such as: fish blood, fuel, oil, bird or animal droppings, acid liquids and chemical cleaners should be avoided or removed immediately and the floor should be cleaned according to the instructions for use. Stains may be left.

Boat Wrapping always stocks the four basic colours (grey with black joints, dark grey with black joints, teak with black joints & teak with white joints). Other colours can be ordered upon request, after an arrangement with the company.

The EVA-FOAM adhesive has been designed to adhere very well to a texture surface. For better performance, the material should finish on a smooth surface, if possible, to ensure proper sealing.

EVA-FOAM is an alternative to the traditional carpet or wooden/synthetic floor. It is made of closed-cell RE/EVA that does not absorb water, provides excellent adhesion both when dry as well as when wet, does not heat up during the day and is resistant to sunlight. Due to its excellent shock-absorbing abilities, it ensures maximum comfort of passengers on board.

EVA-FOAM has its own adhesive that is specially designed for marine use and does not damage the boat’s gel coat when the floor is detached. No additional glue is required.

EVA-FOAM is easy to clean with liquid soap, hot water and a soft brush. Do not use acid-based cleaners.

The material is available in 120 x 220cm sheets, with a specific direction of the pile along its length.

There is a cost per square metre, according to the dimension of the sheets which determines the final area in m2. The final price depends on the area covered and the design. For more information, please call us at 210 2851225 or send us an e-mail at info@boatwrapping.gr .

The manufacturer lists a lifetime of 36 months, which may be higher or lower depending on the usage, weather conditions, maintenance etc. EVA-FOAM is a “value for money” material which, however, does not remain unchanged over time. The boat must be protected from the weather and any water must be thoroughly drained. No type of adhesive can last long when it is permanently in water and dust.

It is very easy to apply, as long as you follow our instructions closely and carefully.

There are plenty of designs that we can support on the material. For engraving, we use a state-of-the-art CNC machine or Laser to produce a Logo, providing our clients with great design options and capabilities in cooperation with our in-house designer.

EVA-FOAM is generally hydrophobic and easy to clean. Stubborn dirt, such as: fish blood, fuel, oil, bird or animal droppings, acid liquids and chemical cleaners should be avoided or removed immediately and the floor should be cleaned according to the instructions for use. Stains may be left.

Boat Wrapping always stocks the four basic colours (grey with black joints, dark grey with black joints, teak with black joints & teak with white joints). Other colours can be ordered upon request, after an arrangement with the company.

The EVA-FOAM adhesive has been designed to adhere very well to a texture surface. For better performance, the material should finish on a smooth surface, if possible, to ensure proper sealing.